PQAS 6 mm Score Cut Knife Holder

One Year Warranty

  • Long and short design for superior cutting
  • Exact cutting widths due to the narrowest manufacturing tolerances
  • Wear reduction through precise alignment to the crosshead
  • User-friendly
  • Minimum Slit Width: 6 mm/0.236 in
  • Knife Diameter: 76.2 mm/3.000 in
  • Web Speed: 600 ft/min
Request Info Compare Products

PQAS 6 mm Score Cut Knife Holder

Product Details

PQAS 6mm is unique in the pneumatic cylinders nest in a long and short design to allow cutting forces resulting from the increased pneumatic piston effective area. Both holders are able to produce 50 pounds force when 90 PSI is applied to the holder. These holders are rated to run up to web speeds of 600 ft/min. PQAS 6 mm holder is capable of slitting down to 6mm (0.236 in) slit widths whether slitting paper, film, foils or tapes.

PQAS 6 mm knife holder employs the same mounting dimensions as all the DIENES PQAS style holders and can be interchanged on the same dovetail bars.

Additional information

Dienes Part #


Drawing Number


Minimum Slit Width Inches

Minimum Slit Width Millimeters

Maximum Web Speed ft/min

Maximum Web Speed m/min



Item # Item Name Dienes Part #
1 Pressure Cylinder 244B301A01001
2 Gasket 244B301A01001
3 Side Plate (R. Hand) 244B110578020
4 Side Plate (L. Hand) 244B110579020
5 Distance Ring 244B010287010
6 Intermediate Piece 244B090864010
7 Axle Pin 244B010314010
8 Standard Clamp 244A372001001
9 Crush Cut Knife 239B080151010
10 Knife Fork 244A185001001
11 Pressure Spring 263D010044010
12 Countersunk Screw 234B010176010
13 Countersunk Screw 234B010176020
14 Hose Assembly (Type 1) 244A113001001
15 Ball Bearing 0FKULAG008002
16 Clamping Split Pin 02777
17 Clamp Body 244B030416010
18 Screw 234B010023010
19 Rivet 234E000003060
20 Quick Disconnect 0FPNZUB010003
21 Hose 244A000113010
22 Clamping Arm 244B020076010
23 Hose Assembly (Type 3) 02298-09
24 Male Connector 02147-09
25 Quick Disconnect 02358
26 Male Snap Connector 02080-09
Item Name Dienes Part #
PQAS 6 mm Long Holder 021116
PQAS 6 mm Short Holder 021117
PQAS 6MM High Parts List
PQAS 6MM Low Parts List
PQAS 6MM High Drawings
PQAS 6MM Low Drawings

PQAS 6 mm Score Cut Knife Holder

Request Info